Detailed Description

Example of architecture-dependent routines.

Macros
#define	_TN_FFS(x) (32 - __builtin_clz((x) & (0 - (x))))
	FFS - find first set bit. More...

#define	_TN_FATAL_ERROR(error_msg,...) {__asm__ volatile(" sdbbp 0"); __asm__ volatile ("nop");}
	Used by the kernel as a signal that something really bad happened. More...

#define	TN_ARCH_STK_ATTR_BEFORE
	Compiler-specific attribute that should be placed before declaration of array used for stack. More...

#define	TN_ARCH_STK_ATTR_AFTER __attribute__((aligned(0x8)))
	Compiler-specific attribute that should be placed after declaration of array used for stack. More...

#define	TN_MIN_STACK_SIZE 36
	Minimum task's stack size, in words, not in bytes; includes a space for context plus for parameters passed to task's body function.

#define	TN_INT_WIDTH 32
	Width of `int` type.

#define	TN_PRIORITIES_MAX_CNT TN_INT_WIDTH
	Maximum number of priorities available, this value usually matches `TN_INT_WIDTH`. More...

#define	TN_WAIT_INFINITE (TN_TickCnt)0xFFFFFFFF
	Value for infinite waiting, usually matches `ULONG_MAX`, because `TN_TickCnt` is declared as `unsigned long`.

#define	TN_FILL_STACK_VAL 0xFEEDFACE
	Value for initializing the unused space of task's stack.

#define	TN_INTSAVE_DATA int tn_save_status_reg = 0;
	Declares variable that is used by macros `TN_INT_DIS_SAVE()` and `TN_INT_RESTORE()` for storing status register value. More...

#define	TN_INTSAVE_DATA_INT TN_INTSAVE_DATA
	The same as `TN_INTSAVE_DATA` but for using in ISR together with `TN_INT_IDIS_SAVE()`, `TN_INT_IRESTORE()`. More...

#define	TN_INT_DIS_SAVE() tn_save_status_reg = tn_arch_sr_save_int_dis()
	Disable interrupts and return previous value of status register, atomically. More...

#define	TN_INT_RESTORE() tn_arch_sr_restore(tn_save_status_reg)
	Restore previously saved status register. More...

#define	TN_INT_IDIS_SAVE() TN_INT_DIS_SAVE()
	The same as `TN_INT_DIS_SAVE()` but for using in ISR. More...

#define	TN_INT_IRESTORE() TN_INT_RESTORE()
	The same as `TN_INT_RESTORE()` but for using in ISR. More...

#define	TN_IS_INT_DISABLED() ((__builtin_mfc0(12, 0) & 1) == 0)
	Returns nonzero if interrupts are disabled, zero otherwise.

#define	_TN_CONTEXT_SWITCH_IPEND_IF_NEEDED() _tn_context_switch_pend_if_needed()
	Pend context switch from interrupt.

#define	_TN_SIZE_BYTES_TO_UWORDS(size_in_bytes) ((size_in_bytes) >> 2)
	Converts size in bytes to size in `TN_UWord`. More...

#define	_TN_INLINE inline
	If compiler does not conform to c99 standard, there's no inline keyword. More...

#define	_TN_VOLATILE_WORKAROUND /* nothing */
	Sometimes compilers are buggy in high-optimization modes, and these bugs are often could be worked around by adding the `volatile` keyword. More...

Typedefs
typedef unsigned int	TN_UWord
	Unsigned integer type whose size is equal to the size of CPU register. More...

typedef unsigned int	TN_UIntPtr
	Unsigned integer type that is able to store pointers. More...

Macro Definition Documentation

#define _TN_FFS ( x ) (32 - __builtin_clz((x) & (0 - (x))))

FFS - find first set bit.

Used in _find_next_task_to_run() function. Say, for 0xa8 it should return 3.

May be not defined: in this case, naive algorithm will be used.

Definition at line 53 of file tn_arch_example.h.

#define _TN_FATAL_ERROR	(	error_msg,
		...
	)	{__asm__ volatile(" sdbbp 0"); __asm__ volatile ("nop");}

Used by the kernel as a signal that something really bad happened.

Indicates TNeo bugs as well as illegal kernel usage, e.g. sleeping in the idle task callback or build-time configuration mismatch (see TN_CHECK_BUILD_CFG for details on the last one)

Typically, set to assembler instruction that causes debugger to halt.

Definition at line 63 of file tn_arch_example.h.

#define TN_ARCH_STK_ATTR_BEFORE

Compiler-specific attribute that should be placed before declaration of array used for stack.

It is needed because there are often additional restrictions applied to alignment of stack, so, to meet them, stack arrays need to be declared with these macros.

See also: TN_ARCH_STK_ATTR_AFTER

Definition at line 77 of file tn_arch_example.h.

#define TN_ARCH_STK_ATTR_AFTER __attribute__((aligned(0x8)))

Compiler-specific attribute that should be placed after declaration of array used for stack.

It is needed because there are often additional restrictions applied to alignment of stack, so, to meet them, stack arrays need to be declared with these macros.

See also: TN_ARCH_STK_ATTR_BEFORE

Definition at line 88 of file tn_arch_example.h.

#define TN_PRIORITIES_MAX_CNT TN_INT_WIDTH

Maximum number of priorities available, this value usually matches TN_INT_WIDTH.

See also: TN_PRIORITIES_CNT

Definition at line 120 of file tn_arch_example.h.

#define TN_INTSAVE_DATA int tn_save_status_reg = 0;

Declares variable that is used by macros TN_INT_DIS_SAVE() and TN_INT_RESTORE() for storing status register value.

See also: TN_INT_DIS_SAVE(); TN_INT_RESTORE()

Definition at line 143 of file tn_arch_example.h.

#define TN_INTSAVE_DATA_INT TN_INTSAVE_DATA

The same as TN_INTSAVE_DATA but for using in ISR together with TN_INT_IDIS_SAVE(), TN_INT_IRESTORE().

See also: TN_INT_IDIS_SAVE(); TN_INT_IRESTORE()

Definition at line 152 of file tn_arch_example.h.

#define TN_INT_DIS_SAVE ( ) tn_save_status_reg = tn_arch_sr_save_int_dis()

Disable interrupts and return previous value of status register, atomically.

Similar tn_arch_sr_save_int_dis(), but implemented as a macro, so it is potentially faster.

Uses TN_INTSAVE_DATA as a temporary storage.

See also: TN_INTSAVE_DATA; tn_arch_sr_save_int_dis()

Definition at line 164 of file tn_arch_example.h.

#define TN_INT_RESTORE ( ) tn_arch_sr_restore(tn_save_status_reg)

Restore previously saved status register.

Similar to tn_arch_sr_restore(), but implemented as a macro, so it is potentially faster.

Uses TN_INTSAVE_DATA as a temporary storage.

See also: TN_INTSAVE_DATA; tn_arch_sr_save_int_dis()

Definition at line 176 of file tn_arch_example.h.

#define TN_INT_IDIS_SAVE ( ) TN_INT_DIS_SAVE()

The same as TN_INT_DIS_SAVE() but for using in ISR.

Uses TN_INTSAVE_DATA_INT as a temporary storage.

See also: TN_INTSAVE_DATA_INT

Definition at line 185 of file tn_arch_example.h.

#define TN_INT_IRESTORE ( ) TN_INT_RESTORE()

The same as TN_INT_RESTORE() but for using in ISR.

Uses TN_INTSAVE_DATA_INT as a temporary storage.

See also: TN_INTSAVE_DATA_INT

Definition at line 194 of file tn_arch_example.h.

#define _TN_SIZE_BYTES_TO_UWORDS ( size_in_bytes ) ((size_in_bytes) >> 2)

Converts size in bytes to size in TN_UWord.

For 32-bit platforms, we should shift it by 2 bit to the right; for 16-bit platforms, we should shift it by 1 bit to the right.

Definition at line 213 of file tn_arch_example.h.

#define _TN_INLINE inline

If compiler does not conform to c99 standard, there's no inline keyword.

So, there's a special macro for that.

Definition at line 219 of file tn_arch_example.h.

#define _TN_VOLATILE_WORKAROUND /* nothing */

Sometimes compilers are buggy in high-optimization modes, and these bugs are often could be worked around by adding the volatile keyword.

It is compiler-dependent, so, there's a special macro for that.

Definition at line 227 of file tn_arch_example.h.

Typedef Documentation

typedef unsigned int TN_UWord

Unsigned integer type whose size is equal to the size of CPU register.

Typically it's plain unsigned int.

Definition at line 105 of file tn_arch_example.h.

typedef unsigned int TN_UIntPtr

Unsigned integer type that is able to store pointers.

We need it because some platforms don't define uintptr_t. Typically it's unsigned int.

Definition at line 112 of file tn_arch_example.h.

Detailed Description

Macros

Typedefs

Macro Definition Documentation

Typedef Documentation